Having had a play with version 2.0 for a couple of days, I see there is the option to run custom reports for a day at a time. This gives a whole shed load of stats at 5 minutes intervals including the PV(n)Power ones. My stats have numbers in PV1 and PV2 which match up with the PVPower shown on the web. Given that I can now see the PV generation for a whole day, is the approx total just the sum of the 5 min interval values?
Be nice if the reporting allowed a date range though!
FoxCloud2.0 Data
-
Dave Foster
- Posts: 1298
- Joined: Thu Oct 13, 2022 7:21 pm
It is basically that, in effect it integrates the values over a fixed time period to turn into kWh and sums them for the day.
Yes this appears to be accurate. The figure is for the PV generation for that 5 minute snapshot.
Say it says pv1 power is 1kw and pv2 power is 2kw, the following formula will give you the kWh generated in that 5 minute interval:
(PV1 Power + PV2 Power)/60 = 0.05kWh
0.05kWh x 5 = 0.25kWh generated in the 5 minutes.
You can then add up all of the values for the day to get the PV generation.
Say it says pv1 power is 1kw and pv2 power is 2kw, the following formula will give you the kWh generated in that 5 minute interval:
(PV1 Power + PV2 Power)/60 = 0.05kWh
0.05kWh x 5 = 0.25kWh generated in the 5 minutes.
You can then add up all of the values for the day to get the PV generation.