FoxESS KH-7
7.05kWp, S/SE facing (15 x Aiko Neostar 2S 470Wp, split into 7+8)
EP11 Battery
100A PME service
I also added a PoE-powered Modbus interface using a Lantronix UDS1100 for the system to link with Home Assistant.
Realised I never posted an entry here. Installed October 2025.
FoxESS KH-7
7.05kWp, S/SE facing (15 x Aiko Neostar 2S 470Wp, split into 7+8)
EP11 Battery
100A PME service
Very happy with the system now. Performing above expectations. Some initial issues with firmware but all resolved now.
I also added a PoE-powered Modbus interface using a Lantronix UDS1100 for the system to link with Home Assistant.
FoxESS KH-7
7.05kWp, S/SE facing (15 x Aiko Neostar 2S 470Wp, split into 7+8)
EP11 Battery
100A PME service
Very happy with the system now. Performing above expectations. Some initial issues with firmware but all resolved now.
I also added a PoE-powered Modbus interface using a Lantronix UDS1100 for the system to link with Home Assistant.
Very tidy looking install, same kit as mine, apart from I have different and lower rated panels totalling 6.16kWp.
I did see that you don't have the 'extra' DC isolator that mine has fitted, don't know why they added one with the Inverter having it built in? I can only guess that people won't see the side switch when in a hurry
I did see that you don't have the 'extra' DC isolator that mine has fitted, don't know why they added one with the Inverter having it built in? I can only guess that people won't see the side switch when in a hurry