FoxESS Community - Owners & Installers Forum

It is showing you the ratio between the current pv power and the size of your array.

But you seem to have set your arrays generation power to 435kWp (very impressive but i'm guessing entered wrong) - to change it edit your site and enter your array maximum size mine is 6.25kwp (i.e. 6.25 kWp at ...

Can anybody let me know what the 0.5% on the desktop version is telling me?
I can see it represents the % power being produced v the PV size is 0.5%, but surely this is never likely to rise much higher.
Just intrigued, as it seems a little odd and meaningless.

{0E87C80A-2C0A-419A-A214-D335F39C0053 ...

Thanks for this.
The battery is outside and sheltered on 3 sides.
The top up charge has seemed to be because it drops below the 20% minimum charge every day, but I have now turned this off to see if it makes a difference. App would not allow me to do it, but found out how to do it on the desktop.
I ...

Hi,
It's not uploaded to grid in the last 2 days, but we are very overcast, so not much production.
Attached as requested,
Thanks for your help,

Hi,
The work mode is in self use, temp had been circa 6 Celsius today.
Battery maxsoc setting is 100%.
Battery reserve capacity is set to 20%, system min SOC is 10%
Many thanks.

I have a new system some 2 weeks old and the invertor is uploading power to the grid, despite the battery only being around 30% charged.
Today it generated 5.2kWh, but sent 1.9kWh (37%) to the grid. Annoying as I used only 1.3kWh from the grid.
Using the V2.0 app and cannot see anywhere to change ...

Will wrote: Sun Dec 15, 2024 12:43 pm If using Andriod you need to make sure that you've not got animations turned off at the phone/system level

Thank you! I would never had thought it looking in the accessibility settings. Switched on, graphics now working.

Hi,
New to solar and this forum as of yesterday!
Probably a something and nothing issue, but the FoxCloud 2.0 app screen with the house on should have moving lines to show the power flow etc.
Installers app was fine, my fresh download and logon with the installer gives no movement, which he could ...