I use Mode Scheduler on phone app and today did an hours force charge but it didnt stop i deleted the entry and it didnt stop importing from the grid 3kw or there abouts there should now only be the force charge for flux 2.00 while 5.00am
this hasnt happened before i have reset the whole thing powered down and back up a couple of times but it shows the grid import i dont know whats going on or how to resolve it i only wanted to top battery up as its been a dull day but its soon gonna be full and beyond that i dont know what will happen any advice would be great Thanks Paul
Was it just an app bug displaying but not really charging or did the inverter screen show a large -number on screen of the inverter?
Community Admin / FoxESS Elite Professional
Did I help you? Feel free to leave me a tip
Book a zoom meeting for remote consultancy or help
Switch to Octopus and earn £50
Get a heatpump from Octopus and earn £100
Subscribe to my YouTube channel
Fox ESS Tri Inverter Installation
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild





Fox ESS Tri Inverter Installation
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
what happened was when i rebooted the batteries i pressed the EPS button and not the power button some how this changed the battery settings in the app and it was trying to charge to 100% using grid as there wasnt much solar i had to disable the mode scheduler and reset the battery settings to 10% it took me about 4 hours to realise what i had done and get the mode scheduler disabled so i could change the battery settings, am not particularly good with the settings on the inverter so i only use the app on my phone at least when i made the changes to the battery settings everything went back to normal.