Brand new user - system installed yesterday.
EVO 10 Battery/Inverter (10.24 KwH battery) with 20 x 470 panels
Can't find a manual anywhere for the EVO 10 (apparently the installers' manual is not out yet) so I'm trying to understand what is in the app.
At the moment I am still on a regular tariff but switch is underway to a time-based tariff.
What I want to be able when I am on my new tariff is the following for the winter months. Probably starting in October
(1) between 22.00 to 00.00 and 00.00 to 06.00 Period 1 I will have the cheapest grid price. So I want to force the battery to charge from the grid during this period and not discharge
(2) from 06.00 until 16.00 Period 2 I want to use any solar I can get and not discharge from the battery
(3) between 16.00 and 19.00 Period 3 I want to use any available solar and force discharge from the battery where solar is insufficient to cover house load as this is my peak grid price
(4) 22.00 to 00.00 becomes Period 4
How do I do this in the app? This is what I have gathered so far
Period 1 00.00-06.00
Work Mode - Force Charge
Min SoC on Grid 10%
Max SoC on Grid 100%
Forced discharge cutoff SoC 10%
FDPwr 0.0W
Period 2 06.00-16.00
Work Mode - Self Use
Min SoC on Grid 10%
Max SoC on Grid 10%
Forced discharge cutoff SoC 100%
FDPwr 0.0W
Period 3 16.00-19.00
Work Mode - Force Discharge
Min SoC on Grid 100%
Max SoC on Grid 10%
Forced discharge cutoff SoC 10%
FDPwr 10000.0W
Period 4
As Period 1
Is that correct?
Any advice would be much appreciated.