hi
I have been using the app for few days since the solar system was installed, all is working ok (had to reverse the CT clamp on the gride wire to get correct flow but all good now).
Issue is, two days ago the main page suddenly does not show the LOAD and GRID power values.
They are still in the app as when I go to accessories and go into the Inverter, I can see the load and grid power flow there but its not translating to main page. See screenshots.
https://i.postimg.cc/FF9BckP7/IMG-2357.jpg
https://i.postimg.cc/zzwQVFFs/IMG-2359.jpg
I tried to log in and out but no difference.
any ideas why is this happening ? bit frustrating.
thanks in advance.
Site Admin
Good news, don't panic it's not you. There was a recent fox app update which has broken all the figures in the app due to a software bug.
Fox are aware and working on a fix, there will be an app update issued soon to resolve.
Fox are aware and working on a fix, there will be an app update issued soon to resolve.
Community Admin / FoxESS Elite Professional
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH & 1 x H1
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH & 1 x H1
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
oh great, thanks for the reply !