Great idea, i've created a hardware category and broken out each battery inverter type as a sub-board. you should see it now.
Keep the ideas coming.
Community Admin / FoxESS Elite Professional
Did I help you? Feel free to leave me a tip
Book a zoom meeting for remote consultancy or help
Switch to Octopus and earn £50
Subscribe to my YouTube channel
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild
Most welcome
Community Admin / FoxESS Elite Professional
Did I help you? Feel free to leave me a tip
Book a zoom meeting for remote consultancy or help
Switch to Octopus and earn £50
Subscribe to my YouTube channel
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild
Will,
Would you consider a dedicated topic to can bus communications? This would bridge both battery (agnostic) and inverter and may suit its own section.
The reason for the request is to reach out to other techs and devs who would be interested in patching many of the new V2 issues that have been reported.
The V1 protocol is already well known in private and this could be a good place to share this information and map the newer features of V2.
Would you consider a dedicated topic to can bus communications? This would bridge both battery (agnostic) and inverter and may suit its own section.
The reason for the request is to reach out to other techs and devs who would be interested in patching many of the new V2 issues that have been reported.
The V1 protocol is already well known in private and this could be a good place to share this information and map the newer features of V2.
Hello,
I've created the Can bus forum here viewforum.php?f=34
I've created the Can bus forum here viewforum.php?f=34
Can wrote: ↑Sat Jan 28, 2023 11:41 am Will,
Would you consider a dedicated topic to can bus communications? This would bridge both battery (agnostic) and inverter and may suit its own section.
The reason for the request is to reach out to other techs and devs who would be interested in patching many of the new V2 issues that have been reported.
The V1 protocol is already well known in private and this could be a good place to share this information and map the newer features of V2.
Community Admin / FoxESS Elite Professional
Did I help you? Feel free to leave me a tip
Book a zoom meeting for remote consultancy or help
Switch to Octopus and earn £50
Subscribe to my YouTube channel
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild
2 x KH Hybird Inverters (Parallel Mode)
1 x H1 Gen1 (Solar Mode)
1 x H1 Gen2 WL (Testing, Modbus and API development)
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
2 x EV's (Tesla & Mercedes)
Heatpump & Low Carbon Housebuild