Fox updated my inverter firmware, my current version are now:
Master 1.43
Slave 1.02
Manager (ARM) 1.52
When the update occurred (around 10pm on Thursday night) my system encountered a few errors requiring me to power cycle the system.
Ever since the update, I’m now seeing 0W being generated by the PVs until the power gets up to over around 200/250W. I see voltage and current but no power, is this a bug? I’m using HA and prior to this update it would show PV power down to 0.001W
Same issue here and I know others see this from the Facebook group.
I've emailed Fox as has another user on the FB group, hopefully others do too to ensure Fox get some focus on the issue.
I've emailed Fox as has another user on the FB group, hopefully others do too to ensure Fox get some focus on the issue.
EP11-H battery | BMS vers. 1.009
KH10 Inverter | Master: 1.52 | Slave: 1.02 | ARM: 1.52
W6 WiFi Datalogger v. 1.08
14 x 460W (6.44 kWp) Aiko Neostar 2S solar panels
7 kW Zappi v 2.1 EV charger
KH10 Inverter | Master: 1.52 | Slave: 1.02 | ARM: 1.52
W6 WiFi Datalogger v. 1.08
14 x 460W (6.44 kWp) Aiko Neostar 2S solar panels
7 kW Zappi v 2.1 EV charger