Page 1 of 1
FoxESS - How to configure Parallel Mode K Series / H1 Gen2 Setup
Posted: Sat Sep 21, 2024 1:09 pm
by Will
FoxESS - How to configure Parallel Mode K Series / H1 Gen2 Setup
Re: FoxESS - How to configure Parallel Mode K Series / H1 Gen2 Setup
Posted: Mon Dec 02, 2024 2:10 pm
by MatthewReadDCE
this is great info, thanks Will.
with regards to the EPS output, with each parallel connected inverter, presumably the capability of the EPS increases accordingly?
So:
1 inverter, EPS 5kW
2 inverters, EPS 10kW
3 inverters EPS 15kW...
and presumably the EPSs will all need their own separate earth, or a common (but separate to grid) earthing arrangment to protect emergency circuits.
Re: FoxESS - How to configure Parallel Mode K Series / H1 Gen2 Setup
Posted: Mon Dec 02, 2024 2:42 pm
by Will
Correct, see my vid here
MatthewReadDCE wrote: Mon Dec 02, 2024 2:10 pm
this is great info, thanks Will.
with regards to the EPS output, with each parallel connected inverter, presumably the capability of the EPS increases accordingly?
So:
1 inverter, EPS 5kW
2 inverters, EPS 10kW
3 inverters EPS 15kW...
and presumably the EPSs will all need their own separate earth, or a common (but separate to grid) earthing arrangment to protect emergency circuits.