Standing charge addition to energy cost (energy dashboard)
Posted: Wed Nov 02, 2022 10:38 am
This may have been answered before, sorry, but has anyone managed to automatically add standing charge to their energy dashboard? Thanks
FoxESS Community - Owners & Installers Forum
This is a private, informal group designed as a support network for all FoxESS owners and installers
https://foxesscommunity.com/
Standing charge addition to energy cost (energy dashboard)
Page 1 of 1
Re: Standing charge addition to energy cost (energy dashboard)
Posted: Thu Nov 03, 2022 2:15 pm
I have the rates automated but I don't have standing charge sadly. Following this thread incase anyone has any ideas.
Re: Standing charge addition to energy cost (energy dashboard)
Posted: Mon Jan 23, 2023 4:21 pm
Hi.
I have a GLOW IHD (Hildebrand) connected to my Home Assistant MQTT Broker. In HA, I have some sensors (obviously), three of which read the price per kWh (Import & Export) and the standing charge directly from my SMETS2.
Now, assuming that your provider of choice has commissioned your SMETS2 properly (it took E.On about 3 months after I chased them as they "couldn't take readings" OTA!!!), you should be able to mqtt that data into HA.
As for showing that rate in the generic HA Energy page, I'm not sure. But I do suspect you can overlay it in a Grafana set of charts?
I have a GLOW IHD (Hildebrand) connected to my Home Assistant MQTT Broker. In HA, I have some sensors (obviously), three of which read the price per kWh (Import & Export) and the standing charge directly from my SMETS2.
As for showing that rate in the generic HA Energy page, I'm not sure. But I do suspect you can overlay it in a Grafana set of charts?