Page 1 of 1
Pulling from grid when battery is 100%
Posted: Thu May 18, 2023 3:54 pm
by shaund1969
Why is it that even though my battery is 100% charged (99% now), that with a house load of 3kWe, solar generating 1.5kWe, I'm pulling 1.5kWe from the grid rather than from the battery?
Re: Pulling from grid when battery is 100%
Posted: Thu May 18, 2023 5:23 pm
by calum
What work mode is your inverter set to? It should be Self Use, it sounds like it might be set to Backup?
Re: Pulling from grid when battery is 100%
Posted: Fri May 19, 2023 11:07 am
by shaund1969
Hi Calum, it's in self use (see attached)
Re: Pulling from grid when battery is 100%
Posted: Tue Jun 13, 2023 8:16 pm
by Forest124
What version of Master are you using?
I had this problem as well, and it was resolved by downgrading the firmware version.
Re: Pulling from grid when battery is 100%
Posted: Wed Jun 14, 2023 5:02 pm
by Tinsta
I've got this same issue too.. how do we go about downgrading the firmware? or surely they'd be an update to resolve this firmware issue?