FoxESS Community - Owners & Installers Forum

hey all together,
I'm currently trying to interact with the CAN interface of an EP11 HV battery pack - it seems to have a different CAN command set as the older LV battery packs...
has anyone decoded it so far?

the specific problem is that I can't set the battery pack's HV terminals to "ON" state, only have the idle-voltage of roughly 100V there and ofc no power in/out capability :-/

would be happy if someone got news on this (v2?) protocol

greets
Simon

You can have a look at this, it was done some time ago but hopefully should provide a good starting point https://github.com/FozzieUK/FoxESS-Canbus-Protocol