New user genset questions.
Posted: Fri Mar 06, 2026 9:37 am
Hey everyone.
Just had my KH 10kw single phase inverter,(grid tied) 42k batt,with 13.2k array installation done and would like some input on what i plan to do and if any potential flaws in my thinking.
# pull the grid main fuse and ring my utility company to cancel my service.
# install appropriate earthing.
# disco the ac cable(load) coming from the meter/supply box and connect it to the eps/ups port on the inverter.
# connect my 9500w sine wave generator to the ac in port on the inverter.
# re configure settings on my inverter to generator input wattage, ups settings and set soc for battery.
I'm not interested in auto genset start or supplying house load with the generator, I just want it to charge the 42 kw battery bank on the very rare occasion it may be required.
TIA.
Just had my KH 10kw single phase inverter,(grid tied) 42k batt,with 13.2k array installation done and would like some input on what i plan to do and if any potential flaws in my thinking.
# pull the grid main fuse and ring my utility company to cancel my service.
# install appropriate earthing.
# disco the ac cable(load) coming from the meter/supply box and connect it to the eps/ups port on the inverter.
# connect my 9500w sine wave generator to the ac in port on the inverter.
# re configure settings on my inverter to generator input wattage, ups settings and set soc for battery.
I'm not interested in auto genset start or supplying house load with the generator, I just want it to charge the 42 kw battery bank on the very rare occasion it may be required.
TIA.