Please note after a recent update (13th September 2024) the OpenAPI (and consequently Energy Stats) are unable to set schedules, they return a 41200 error.
Fox ESS dev have been notified this morning (14th Sept), but it needs them to find, it fix it and turn around a solution so it may not work for a week or two - i’ll update if I know anymore.
Duplicating @Dave Foster post in the ES app area to help folks and making it sticky.
41200 error.
Community Admin / FoxESS Elite Professional
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH Series Inverters
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH Series Inverters
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
Perfect thanks for the update
Community Admin / FoxESS Elite Professional
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH Series Inverters
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH Series Inverters
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
I'm receiving this error on the endpoint https://www.foxesscloud.com/op/v1/device/real/query
I'm calling this endpoint for my home automation. Is there any status page or such from foxess or official issue-tracker?
I'm calling this endpoint for my home automation. Is there any status page or such from foxess or official issue-tracker?
This was broken and then fixed again this morning. There is an unofficial status page at https://monitor.foxesscommunity.com/status/foxess