Standing charge addition to energy cost (energy dashboard)
I have the rates automated but I don't have standing charge sadly. Following this thread incase anyone has any ideas.
Community Admin / FoxESS Professional
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH Series Inverters
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
Buy me a coffee or Book a zoom meeting for remote consultancy
FoxESS Tri Inverter Installation
2 x KH Series Inverters
24 x HV2600 (62.4kWh)
32 x 490w across 4 arrays
Dual Tesla Household
Heatpump & Low Carbon Housebuild
-
rashdown_online
- Posts: 7
- Joined: Wed Jan 18, 2023 4:49 pm
Hi.
I have a GLOW IHD (Hildebrand) connected to my Home Assistant MQTT Broker. In HA, I have some sensors (obviously), three of which read the price per kWh (Import & Export) and the standing charge directly from my SMETS2.
Now, assuming that your provider of choice has commissioned your SMETS2 properly (it took E.On about 3 months after I chased them as they "couldn't take readings" OTA!!!), you should be able to mqtt that data into HA.
As for showing that rate in the generic HA Energy page, I'm not sure. But I do suspect you can overlay it in a Grafana set of charts?
I have a GLOW IHD (Hildebrand) connected to my Home Assistant MQTT Broker. In HA, I have some sensors (obviously), three of which read the price per kWh (Import & Export) and the standing charge directly from my SMETS2.
As for showing that rate in the generic HA Energy page, I'm not sure. But I do suspect you can overlay it in a Grafana set of charts?