Battery serial numbers

[Sloanyd]

I have just discovered my batteries have different version number, please see screen dump attached.
Should i ask the installer to update or is this nothing to worry about?

[Dave Foster]

At a minimum all the slaves should be the same version, but actually they are really old firmware versions, I would recommend you ask your installer or raise a ticket along with your inverter serial number to FoxESS and get them updated - later versions have improved capacity, temperature handling and SoC stability.

Current Mira Versions are :-

1.011 for Master (BCU) and 1.09 for Slave (BMU)

[Sloanyd]

Thank you Dave,

I have contacted the installer, I will give them a week to update and raise a ticket if they dont do it.

Darren

[reef]

Please let know if you see any improvements when the firmware is updated. I'm running 5x HV25s like yourself and am also on master 1.004 and have 4 batteries on 1.00 and one on 1.001.

[Sloanyd]

Please let know if you see any improvements when the firmware is updated. I'm running 5x HV25s like yourself and am also on master 1.004 and have 4 batteries on 1.00 and one on 1.001.

Will do

[reef]

I've just been updated to the latest versions today which are now 1.013 Master and 1.10 slave. I'll report if I see any improvement!