Pulling from grid when battery is 100%
Why is it that even though my battery is 100% charged (99% now), that with a house load of 3kWe, solar generating 1.5kWe, I'm pulling 1.5kWe from the grid rather than from the battery?
Re: Pulling from grid when battery is 100%
What work mode is your inverter set to? It should be Self Use, it sounds like it might be set to Backup?
H1-3.7 / 6xHV2600 / 14x400W / RS485 Modbus->HA
FoxESS Modbus HA Integration
Contact Fox here
Re: Pulling from grid when battery is 100%
Hi Calum, it's in self use (see attached)
Screenshot 2023-05-19 110652.jpg
Re: Pulling from grid when battery is 100%
What version of Master are you using?
I had this problem as well, and it was resolved by downgrading the firmware version.
Fox ESS KH10.5 Hybrid inverter
15 x Longi 550W solar (8.25 kw)
Fox ESS Cube 3 * 4.7kw (14.1 kw)
Re: Pulling from grid when battery is 100%
I've got this same issue too.. how do we go about downgrading the firmware? or surely they'd be an update to resolve this firmware issue?
Post Reply