Search found 208 matches
- Wed Oct 19, 2022 10:58 am
- Forum: HV2600
- Topic: V2 BMS and Batteries
- Replies: 22
- Views: 6479
Re: V2 BMS and Batteries
Just wanted to confirm the HV2600 batteries and BMS came new from a fox supplier right? If it did then I would contact your supplier and if required foxess support.
- Tue Oct 18, 2022 7:11 pm
- Forum: Firmware
- Topic: H1_Manager_V1.49
- Replies: 9
- Views: 2713
Re: H1_Manager_V1.49
I would email direct using that address, others have reported no issue when using this address for support.
- Tue Oct 18, 2022 7:10 pm
- Forum: HV2600
- Topic: V2 BMS and Batteries
- Replies: 22
- Views: 6479
Re: V2 BMS and Batteries
if combine they're at 50volts and they should be more like 100ish volts this is likely why the system is dead. I bet it's expecting 100v minimum as it requires 2 battery units.
- Tue Oct 18, 2022 7:03 pm
- Forum: HV2600
- Topic: V2 BMS and Batteries
- Replies: 22
- Views: 6479
Re: V2 BMS and Batteries
Battery awaken breaker should be turned off and the cover should be closed flush with the bms.
- Tue Oct 18, 2022 5:28 pm
- Forum: Firmware
- Topic: H1_Manager_V1.49
- Replies: 9
- Views: 2713
Re: H1_Manager_V1.49
Just to check, you've emailed service.uk@fox-ess.com correct?
- Tue Oct 18, 2022 5:03 pm
- Forum: Pre-sales Questions
- Topic: Sizing a Hybrid Installation
- Replies: 8
- Views: 1842
Re: Sizing a Hybrid Installation
Good call on the data driven decision, home assistant will clearly show you how much battery/solar and grid you're using. On the battery side, there is no formal requirement that you install new batteries within a year, it's simply best practice but you could technically install more batteries in 2 ...
- Tue Oct 18, 2022 5:01 pm
- Forum: HV2600
- Topic: V2 BMS and Batteries
- Replies: 22
- Views: 6479
Re: V2 BMS and Batteries
Can you upload/attach a photo of your full setup?
- Tue Oct 18, 2022 3:31 pm
- Forum: Customer/End User Help
- Topic: Add additional battery with or without more panels?
- Replies: 2
- Views: 553
Re: Add additional battery with or without more panels?
Hey, On batteries - you can technically add batteries at any time but the larger the delta in new vs old batteries the worst perfomance you'll get, it's noting worth losing sleep over however. It's recommended to installers to scale within the first year if possible. On solar - Inverters are limited...
- Tue Oct 18, 2022 3:21 pm
- Forum: Pre-sales Questions
- Topic: Sizing a Hybrid Installation
- Replies: 8
- Views: 1842
Re: Sizing a Hybrid Installation
FoxESS like many inverters have MPPT solar features which is Maximum Power Point Tracking which can alter panel efficiency to match demand and capacity of the inverter. I believe the unused solar is converted into heat by the panels and inverter. Regarding what size battery you would benefit from. I...
- Tue Oct 18, 2022 10:54 am
- Forum: Pre-sales Questions
- Topic: Sizing a Hybrid Installation
- Replies: 8
- Views: 1842
Re: Sizing a Hybrid Installation
Hello, On the inverter sizing, yes it's best practice and normal to underrate the inverter slightly vs the full possible panel generation potential value. The panels will normally only generate their rated wattage in lab conditions so in the real world they'll perform slightly worst. Inverters have ...
- Tue Oct 18, 2022 10:39 am
- Forum: Customer/End User Help
- Topic: Home Assistant Energy Dashboard Charge kWh reliable?
- Replies: 7
- Views: 1083
- Tue Oct 18, 2022 10:38 am
- Forum: Firmware
- Topic: H1_Manager_V1.49
- Replies: 9
- Views: 2713
Re: H1_Manager_V1.49
Agent accounts have the firmware updater which sends and installs updates over the cloud via the wifi module.
If you're not an agent you should speak to your installer or contact fox support.
If you're not an agent you should speak to your installer or contact fox support.
- Mon Oct 17, 2022 8:53 pm
- Forum: Mobile App Help
- Topic: FoxESS mobile App - data not updating / Inverter offline
- Replies: 23
- Views: 16869
FoxESS mobile App - data not updating / Inverter offline
If you've noticed that your inverter is not sending data to the FoxESS cloud or that your inverter appears offline on the app but is working fine follow these steps. IF YOUR INVERTER HAS NEVER REPORTED CORRECTLY ENSURE THE FIRMWARE IS UP TO DATE AS THIS IS A COMMON ISSUE. 1. Is the wifi module flash...
- Mon Oct 17, 2022 8:47 pm
- Forum: HV2600
- Topic: V2 BMS and Batteries
- Replies: 22
- Views: 6479
Re: V2 BMS and Batteries
Can you upload a photo of the BMS? Normally HV2600 are around 53volts. 20 voltages sounds like permanent damage has occurred. I assume you have the BMS connected to an inverter right? then you set the dip switches to the correct dip position, turn on the main MCB breaker and then press the silver po...
- Mon Oct 17, 2022 5:31 pm
- Forum: Customer/End User Help
- Topic: Home Assistant Energy Dashboard Charge kWh reliable?
- Replies: 7
- Views: 1083
Re: Home Assistant Energy Dashboard Charge kWh reliable?
Hello, I would be interested to hear what FoxESS support come back with but all my installs are the same. I believe it's all to do with BMS calibration and how tricky LifePo4 batteries are to gain a true SoC. Whats likely happening is the missing capacity is either not being used and when it states ...
Mira HV25
The Mira HV25 is a new high-performance, scalable battery storage module product by FoxESS. It appears to be very similar to the HV2600 The modular design allows for maximum flexibility, making it suitable for a broad range of storage applications. Additional batteries can be installed in series, al...
- Mon Oct 17, 2022 2:39 pm
- Forum: HV2600
- Topic: V2 BMS and Batteries
- Replies: 22
- Views: 6479
Re: V2 BMS and Batteries
As no V2's have yet landed in the UK, it's 99.999999% likely you have a V1.
- Mon Oct 17, 2022 2:38 pm
- Forum: Home Assistant
- Topic: [HA Integration] Energy Management
- Replies: 15
- Views: 2676
Re: [HA Integration] Energy Management
Great work, nice one!
- Sun Oct 16, 2022 11:35 am
- Forum: Inverter Hardware
- Topic: Extended Warranty Registration
- Replies: 2
- Views: 2224
Re: Extended Warranty Registration
Hey @Ibuk,
It's not required for end-user registrations or installers who are not top-tier partner installers. Just leave it blank if you haven't been issued a reference.
It's not required for end-user registrations or installers who are not top-tier partner installers. Just leave it blank if you haven't been issued a reference.
- Sun Oct 16, 2022 9:14 am
- Forum: Battery Hardware
- Topic: Clear BMS/Battery Error while waiting for batteries to be installed (BMS LOST))
- Replies: 0
- Views: 2018
Clear BMS/Battery Error while waiting for batteries to be installed (BMS LOST))
Screenshot 2022-10-16 091207.png It's pretty common while there are long delays on battery installations for installers to install just the inverter, which will act as a solar inverter only. The downside of this is that it leaves you with a nasty BMS COMS LOST error and a red flashing error which i...
- Sat Oct 15, 2022 6:45 pm
- Forum: HV2600
- Topic: V2 BMS and Batteries
- Replies: 22
- Views: 6479
Re: V2 BMS and Batteries
My fox contact recently confirmed that remote flashing won't work and a V2 BMS will be required. If you have a different experience we'd love to hear about it.
- Sat Oct 15, 2022 10:56 am
- Forum: Firmware
- Topic: H1_Manager_V1.49
- Replies: 9
- Views: 2713
H1_Manager_V1.49
H1_Manager_V1.49 released but no noticeable changes to features or settings.
- Sat Oct 15, 2022 9:52 am
- Forum: Energy Cube (ECS)
- Topic: Adding Slaves To Cube.
- Replies: 10
- Views: 4225
Re: Adding slaves to cube.
yep, that is spot on what I do when upgrading customers batteries. Cubes just make it easier as you don't have to mess around with brackets and cables. Please post pictures once done or get someone to record you upgrading it so we can create an upgrade video to help others.
- Sat Oct 15, 2022 9:50 am
- Forum: Automation Ideas
- Topic: Turn on immersion heater via smart switch when exporting power
- Replies: 8
- Views: 4235
- Fri Oct 14, 2022 6:46 pm
- Forum: HV2600
- Topic: HV2600 Manual
- Replies: 4
- Views: 1804
HV2600 Manual
HV2600 Manual