FoxESS Community - Owners & Installers Forum

Looking at the data spec, it seems both the Mira & HV2600 batteries have a nominal voltage of 51V & recommended/maximum current of 25/50A, so the cable kits should work for both. I am not a sparky though, so unless a supplier/Fox confirms this is very much at your own risk!

What datalogger device/firmware are you using? With my setup I have a W2 datalogger, and there was a 3.13 firmware released for that (and a large number of other devices). After updating to it, I found I couldn't update any firmware (same issue with a timeout). About a week later, FoxESS had pulled ...

No problem - glad you got it sorted

Only an agent login can update the firmware. If your account isn't linked to an agent, you might be able to create an agent account and link yourself; just be careful that you stay in compliance with any warranty or similar with your installer. Some people here have bought a second datalogger (about ...

There should be a wifi network showing with a name in the form `W-....` - for instance 'W-AAA1AAA'. Connect to that network (default password is 'mtmt2020'). You will get a warning saying the network has no internet - choose to connect anyway. Once connect, go to 192.168.1.1 in your web browser. You ...

How can you tell what version I am currently on for the BMU/BCU? Can the firmware for the HV2600 be used on HC2600 v2? On the 'firmware' tab, for battery master/slave there is only firmware listed for 'ECS' & 'HV2600'. Thanks, Robert Hi, the HV2600 (v1) and HV2600 (v2) use very different firmware ...

Good Afternoon, A couple of weeks back I had solar & battery storage installed. The solar is monitoring/controlled via the SolarEdge app, while the battery storage is managed via FoxESS Cloud. While the installer has kept 'installer' access for the SolarEdge platform, they don't have an installer ...