Search found 7 matches

My (H1 G2 + EP11) installer has connected to an existing ac type rcd in the Consumer Unit, shared with household circuits. It's been tripping. There is a long armoured ac run from inverter to CU. Looking at regs and manual the options seem to be:
1.Dedicated A type rcd in CU
2. Dedicated RCBO in CU ...

Just an update: the Agent interface has a ClearEvents switch. This got rid of the G100 state 3 error and we are back up and running. I wish Fox would document this!

Thanks very much. My installer just did a full set of firmware updates and switch to the G99 settings with the 3680W export limit.

After a full reset we get the same G100 state 3 error. Is this a lockout that needs clearing by the Agent or by Fox? My installer also has an agent account but can't ...

Day 2 of operation and we had a grid fault with an RCD trip. Not sure whether this was caused by inverter. But result is after a couple of attempts to restart the inverter (H1 G2 5kw) is showing G100 state 3. However settings are configured for G98 with an export limit of 3600W. The DC input is ...

Thanks Dave
Network connection worked perfectly... I had a bad connection, now fixed. Operating from EndUser account only and hopefully will keep it this way.

Thanks very much Dave

This is very much a joint effort with my installer who hasn't tackled a Fox system before (and it's his first solar system).

I thought that if I started under my account (EndUser) that we would not need an Installer account (and there's no agent). I was able to create a Plant ...

I have a new H1 G2 inverter "with LAN" and battery but they are in a location with no wifi. They are operating ok but I can't monitor them through the app. We have run cat6 ethernet to the datalogger, so everything is physically connected, but I can't actually find any instructions from Fox about ...