FoxESS Community - Owners & Installers Forum

I’m thrilled to announce our new recommended suppliers for Fox ESS hardware for UK customers. Many hours have gone into reviewing each supplier across multiple categories including stock, product knowledge, price, speed of delivery and customer reviews. Thank you to all those who responded to my fee...

Nice write up! Thanks I know what I'll be doing this weekend.

Welcome

Welcome to the group

Sadly this is a limitation of the system. If you want better site reporting I would also install a ct clamp on the F series so it can monitor house loads.

the second minsoc is set to 99% that is wrong, both soc inputs should be at 10% if you're not using it in EPS mode for backup power.

Be careful the EPS port might be 6kW in the datasheet but can only handle 20amps or 25amps depending on version which will cause it to keep overload tripping.

How does the graph look today?
You can't make decisions with the power graph in real time as it only updates every 5mins and can be confusing. If it's still looking wrong I would normally suspect that the inverter mode is not set to self use mode or the ct clamp is installed backwards.

If you install a ct clamp on both inverters and setup the export limit on both then it will work just as well.

Most likely the trip switch has tripped. Check your power supply to the inverter. I bet the in the fuse board you'll find a tripped fuse.

Welcome to the forum Simon.

Welcome,

If you have a hot water tank, consider an Eddi or Iboost to turn your surplus into hot water.

Hello & Welcome,

Best to shoot a message over to the NL team on service.nl@fox-ess.com.

Moving post to the LV5200 area.

Means you need to set the inverter to say G98 or G9 for UK under Settings > 0000 > Feature > Safety

Welcome, and yes we believe it's related to the two new EV charging products announced.

Hello,

I do remote commissioning, click the link below and book and hour of my time to do this remotely over video.

Will

I've noticed that you need to be on the latest firmware for the batteries to report correctly. make sure your firmware is up to date.

I love the idea, might be better to link to your GitHub so people can download from there, raise issues and contribute.
You're very welcome to post and announce your tool and link to GitHub.

Correct, it's the wifi datalogger serial under the QR code not he inverter serial that you need to setup under the site area of the fox app.

I believe you need an earth spike connected to the P+E of the EPS plug for this to work.

Thanks for the update that a firmware update was required to resolve this.

Hi,

I'm the admin, i'm looking into this for you now.

Thanks for sharing

Nice setup, welcome to the forum.