FoxESS Community - Owners & Installers Forum

Good morning I have the below Meter i was hoping to use this to (instead of a CT clamp) Have wired up and selected the meter seems to no error and if i unplug the meter (just to test on another spur) it seems to error when i switch on it seems to start discharging at over 2KW and cannot for th life ...

Yes i can see that in the menu
but i would like to control this via H485 from home assistant
so that it can force discharge at a level i request
(this is cause i cannot fit a CT very easily in my house to the invertor

Any one know if any updates
So this can be done over mod bus yet

Well to install a CT clamp in my house to the inverter is going to be a massive job Instead I thought about linking the fox H1 to HA Via 485 to ethernet, so the H1 can talk to the fox if that's possible Then get ha to monitor the meter(which it does via mqq) and when in negative to zero that power ...

Good morning
The inverter is a long way from the grid input
Is there a way to wireless the CT clamp
Or is there a way the H1 can talk to the mqq feed from my grid meter, (glow) this feeds my home assistant and updates every 6 secs
Or something
Thanks
Martin

So I have a existing solar, and was going to install this with a leaf battery with some battery management which will sort that. But with the CT clamp in place does it monitor any excess energy and be able to funnel into the battery Or what are my options , I could in theory use home assistant to ...