FoxESS Community - Owners & Installers Forum

good morning, thanks Dave it's very interesting. thanks to your advice and the programming of the work mode based on the time slots you have opened up a world to me and solved many problems. I must say that since our last massage I have had no problems and I am also able to optimize consumption ...

what you mentioned would be really fantastic and I'm very interested as soon as I finish some work I will do it. If you want obviously when you can could you explain it to me? I would like to do it. Another thing is that I charge it at 7.5a, maybe I have to lower it because it charged the batteries ...

then with the planning it works really well. I detect 0 errors and neither the Solaredge nor the Fox Ess inverter seems to have ever been disconnected. I just have to start understanding how long it takes more or less for the batteries to charge so as to adjust the interval and if I want I can try ...

good morning Dave. So I planned it with the schedule as per the screen, because even in the afternoon I have sun until 7pm and therefore according to the program they should be charged from 11am. I set the battery charge from 35a to 7.5a and let's see how it goes. I'll update you

Yes, I'm sorry, maybe I didn't translate what I wrote to you well. yes, I know that 5a 7a did not refer to the quantity of batteries but to the charge entering them. I just wanted to have confirmation (to avoid damage) in the battery charge section set by default at 35a I had to go down to 7a or 5a ...

excellent. yes I have the latest firmware on board updated about 15 20 days ago by fox ess itself. at this point I think that as soon as I can I will follow your advice and program the schedule from 11 as you described.. one thing is not clear to me sorry. in the inverter in the battery branch which ...

excellent. everything is quite clear. the extra battery is arriving this week reaching 7 and I think I will try to have them charged only from 11.. but 1 question do I have to reset everything with default parameters? even if I wanted to leave it like this with 1 error Like before I had a 10min avg ...

I'd rather have them charged from 12:00 onwards, but if it's sunny in the morning and then not, I find them partially discharged? Right? If I leave them like that instead and hope for a miracle of changing the cables (since I go every day to my e-distribution to bother them) could I suffer some ...

here I am. so I get the usual grid voltage fault errors punctually when I enter a lot. at this point I really don't know. I'll leave it like this. cheerful screen

perfect thank you so much. I'll update you tomorrow if I can disturb you

if only my fox ess ac1-3.0-e inverter was compatible with the Solaredge optimizers I would avoid the Solaredge inverter itself (because this inverter also goes into overvoltage and disconnects) by connecting the panels and optimizers only to the Fox Ess inverter. Then I increase the vac to 263.2 and ...

so, unfortunately I have old cables with a small section which when I input a lot go into overvoltage and don't hold up. The problem is that e-distribuzione doesn't change them unless they have knowledge. Another time at around 12pm I was inputting 3 into the network, 5kw (a bit of a cloudy day ...

this night everything was fine. 0 errors, but now at 12 and something here they are. Any ideas?

this night everything was fine. 0 errors, but now at 12 and something here they are. Any ideas?

perfect so far everything is fine we will see this evening in the meantime thank you always for your time

sorry for the many posts here I put the rfreq and rvolt graph and calculate that from around 12:00 I had 6 errors avg set to 253 (done yesterday because otherwise it would give me frequency error while I was using the batteries and I know it's not related but by setting it to 253 it doesn't give me ...

perfect lower fac 1 set at 47.50 hz and I kept the 10min avg on 257 is everything correct? but one thing if I don't change the 10min avg and leave it at 253 it doesn't give me a frequency error in the evening, if instead I change it I from error

perfect thanks. set as you say after 2pm I'll take off from work thanks and I'll leave 10min avg as you say

and nothing I have again grid frequency fault error ugh. I attach screen? the change of the 10min avg to 257 I imagine it has nothing to do with the frequency

excellent. then I set it as you told me 257.0. hoping that the Solaredge inverter will also hold up having activated the moving average from the assistance they call it. thank you very much

perfect. yes I have a lot of energy. so I only change 10min avg in 257,0.just that? I leave the vacs like this?

here is the graph there was an error even a few minutes ago. I'll give you the one from yesterday and d today's

Ecco vedi?

Hi Dave and thanks again for yesterday. So I no longer had that rfreq error (this night), excellent and thanks. Only the usual 10min avg fault errors remained and those are when the PV inputs a lot and goes into over volts and I don't think those can be fixed. Anyway, thank you very much

excellent, then I'll write to you in a few days if I can disturb you. In the meantime, thank you very much