FoxESS Community - Owners & Installers Forum

I think I'm going to use a pair of solar powered fans.
So a lot of sunshine will speed them up. I don't have them yet but I will see how much power they have and if I keep using them. Here, in summer the temperature will be between 28 and 34 for at least 2 months.

I have the same question as the TS: - What do others think, are they incorrectly labelled? My outside temp is 15 (Celsius) from the foxess cloud I see the internal temp is 45 which is possible. But the external temp is 46 which would also be possible if this temp is NOT measured outside the device ...

I would love to. Can I add my existing installation to the new account. But don't I need installer/agent code's or registration at foxess? I did find an agentcode on the polish website for use as a 1-man (or verry small) company, I think it's not possible to register a SN more than one time and am ...

solved trying to set ct/meter gave a fault and shut down the inverter so there was no meter connected. I disconnected and testet the wiring, which was ok. After putting it all back together, 2hours later I decided to set again ct/meter. Now the option to choose meter came up and I could set a number ...

Thank you for your answer, Yes I use the same n,1,9600 settings, I assume the address on the inverter is 001 so I changed the address on the meter to 002. After a day nothing changed in the fox cloud, no Home load visible. This morning the error didn't come up again. :?: Did I miss something? The ...

I have the same error code. T12-G3 connected rs485 A to A and B to B using pin 3 and 4 . The meter is set to N,1,9600 I cannot find or change the settings on my inverter, what are these settings so I can change the settings on my meter, DTSU666-ct. The meter has documentation I can use, the cable ...

I want to use Limit Export (set to 10KW) and need to feed the inverter with the KW's that go into the grid. - If I can get an rs485 module for my Iskra AM550, after connecting it via rs485 to my inverter, will it be detected automatically on the inverter and in the foxess app? - Is it possible to ...