FoxESS Community - Owners & Installers Forum

Dave,

With your guidance I have got it working! Much appreciated. I wasn't adding it after adding it through HACS.

I will need to look at charge periods and the setting you've advised should be disabled. Presumably these are easily changed via home assistant now.

Thanks again.

Hi Dave,

Cheers for that. I've ran modpoll and this is what it's coming back with:

modpoll 3.11 - FieldTalk(tm) Modbus(R) Master Simulator
Copyright (c) 2002-2024 proconX Pty Ltd
Visit https://www.modbusdriver.com for Modbus libraries and tools.

Protocol configuration: MODBUS/TCP, FC3
Slave ...

Thanks Dave.

I've tried a few of those integrations, and currently have that one installed. HA is installed via docker if that makes any difference.

I've definitely got them wired to 485A/B, and not the meter one. After trying your suggestion below, I think I'll need to switch A and B round and ...

Sorry to resurrect this thread, but I'm just trying to wrap my head around this.

I have the Elfin EW11 wired into the h1 inverter with the A and B connections in what I'm fairly certain is the right place 485A and 485B respectively?

I also have the EW11 powered via USB and all settings as per HA ...

I've done everything as per instructions, modbus all wired up. Except for the usb. I cannot work out how to get the cap/cover off to access the usb port on the inverter. It's a slot that says M20 x 1.5, looks like you could put a coin in and turn it.

When I try and turn it, nothing is moving and I ...

Thanks, this is really helpful!

Hi,

I'm looking for a bit of assistance please. I have a modbus to connect into the inverter (H1-5.0.E), but there's a cable coming out of the rs485 port, leading to a CT on the cable linking into the meter.

Assuming they are using the same port, is it possible/sensible to remove the existing ...